Filters

Feel Well® Ultra™ Series

for Bottleless Water Coolers

Feel Well® Ultra™ Series 1000 & 2000 Tested and certified by WQA under ANSI/NSF standards 42 & 53 for the reduction of: (Extra Lead Reduction for old buildings)

Standard number 42 Aesthetics Effects

• -Chlorine reduction
• -Taste and Odor

Mechanical Filtration

• -Normal Particulate Class I:
• -97.9% reduction of particulates on-half micron and larger

Standard number 53 Health Effects

• -Lead
• -Cyst
• -Asbestos

Feel Well® Premium Series

for Bottleless Water Coolers

Feel Well® Ultra™ Series 1500 & 3000 Tested and certified by WQA under ANSI/NSF standards 42 & 53 for the reduction of: (Extra limescale removal protects equipment

Standard number 42 Aesthetics Effects

• -Chlorine reduction
• -Taste and Odor

Mechanical Filtration

• -Normal Particulate Class I:
• -97.9% reduction of particulates on-half micron and larger

Standard number 53 Health Effects

• -Chemical Reduction - Lead
• -Mechanical Filtration -Cyst

Reverse Osmosis Filtration

for Bottleless Water Coolers

Why RO? RO is needed in areas with high total dissolved solids (TDS) in the source water. These areas are primarily located in western and southwestern states where the water source comes from aquifers vs. ground water i.e. lakes and rivers.

What is RO? RO systems are either a 3- or 4- stage system depending on the holding tank.

1. The first stage is a 5 micron Sediment filter that traps particulate matter like dirt, rust and silt.
2. The second stage is a 5 micron Carbon Block filter reducing chlorine and other materials that cause bad taste and odors (pre-filter)
3. The third stage is the heart of the RO system or the Membrane. This 50 gpd semi permeable membrane removes TDS, Sodium, Percolate, Chromium, Arsenic, Copper and Lead. It also removes cysts such as Giardia and Cryptosporidium together with Nitrates and Nitrites.
4. The fourth stage is needed to clean the water after it passes through the holding tank. If using a cooler with sufficient reservoir space no holding tank or fourth stage filter is needed.

Everpure OW2-PLUS Submicron Filter

for Bottleless Water Coolers

Reduces lead up to 99%. Precoat design removes particles 1/2 micron and larger in size including Cyptosporidium, asbestos fibers, dirt, bad taste and odor, chlorine, mold and algae.

Everpure OW4-PLUS Submicron Filter

for Bottleless Water Coolers

Reduces lead up to 99%. Precoat design removes particles 1/2 micron and larger in size including Cyptosporidium, asbestos fibers, dirt, bad taste and odor, chlorine, mold and algae.